Aqueous Solution Research Articles

The role of membrane transporters in the absorption of atrazine following nasal exposure.

The purpose of these studies was to investigate the uptake of atrazine across the nasal mucosa to determine whether direct transport to the brain through the olfactory epithelium is likely to occur. These studies were undertaken to provide important new information about the potential for the enhanced neurotoxicity of herbicides following nasal inhalation. Transport of atrazine from aqueous solution and from commercial atrazine-containing herbicide products was assessed using excised nasal mucosal tissues. The permeation rate and the role of membrane transporters in the uptake of atrazine across the nasal mucosa were also investigated. Histological examination of the nasal tissues was conducted to assess the effects of commercial atrazine-containing products on nasal tissue morphology. Atrazine showed high flux across both nasal respiratory and olfactory tissues, and efflux transporters were found to play an essential role in limiting its uptake at low exposure concentrations. Commercial atrazine-containing herbicide products showed remarkably high transfer across the nasal tissues, and histological evaluation showed significant changes in the morphology of the nasal epithelium following exposure to the herbicide products. Lipophilic herbicides such as atrazine can freely permeate across the nasal mucosa despite the activity of efflux transporters. The adjuvant compounds in commercial herbicide products disrupt the nasal mucosa's epithelial barrier, resulting in even greater atrazine permeation across the tissues. The properties of the herbicide itself and those of the formulated products play crucial roles in the potential for the enhanced neurotoxicity of herbicides following nasal inhalation.

Coumarin-Modified Starch Fluorescent Nanoparticles as Sensor of Fe3+ and Zn2+ ions Utilizing Dynamic Quenching and Chelation Mechanisms.

Zinc and iron are two essential trace minerals that play a pivotal role in maintaining optimal health and well-being in the human body. Despite being required in relatively small quantities, their significance can be understated as they participate in a wide array of critical physiological processes such as oxygen transport, DNA synthesis, controlling nutrient availability, etc. Understanding the distribution and behavior of these ions in natural water bodies is essential for assessing water quality, studying ecological processes, and managing environmental impacts. In this study, we have developed a dual fluorescence probe using starch which was functionalized with coumarin derivatives, for efficient detection of Fe3+ and Zn2+ ions. This structure led a self-assembled starch/coumarin (SC) fluorescent nanoparticles with strong fluorescence intensity under ultraviolet light (365nm). The quenching effect of Fe3+ on the SC fluorescent probe enabled efficient specific detection of Fe3+. Furthermore, Zn2+ ions increased fluorescence intensity of coumarin compounds (λemission = 459). This phenomenon occurs when the coumarin compound forms a complex or interacts with the zinc ion, resulting in enhanced fluorescence emission. In summary, the developed fluorescent probe offered a promising approach for sensitive and specific detection of iron and zinc ions in aqueous solutions.

Reengineering of an Artificial Protein Cage for Efficient Packaging of Active Enzymes.

Protein cages that readily encapsulate active enzymes of interest present useful nanotools for delivery and catalysis, wherein those with programmable disassembly characteristics serve as particularly attractive platforms. Here, a general guest packaging system based on an artificial protein cage, TRAP-cage, the disassembly of which can be induced by the addition of reducing agents, is established. In this system, TRAP-cage with SpyCatcher moieties in the lumen is prepared using genetic modification of the protein building block and assembled into a cage structure with either monovalent gold ions or molecular crosslinkers. The resulting protein cage can efficiently capture guest proteins equipped with a SpyTag by simply mixing them in an aqueous solution. This post-assembly loading system, which circumvents the exposure of guests to thiol-reactive crosslinkers, enables the packaging of enzymes possessing a catalytic cysteine or a metal cofactor while retaining their catalytic activity.

Dielectrophoresis: Measurement technologies and auxiliary sensing applications.

Dielectrophoresis (DEP), which arises from the interaction between dielectric particles and an aqueous solution in a nonuniform electric field, contributes to the manipulation of nano and microparticles in many fields, including colloid physics, analytical chemistry, molecular biology, clinical medicine, and pharmaceutics. The measurement of the DEP force could provide a more complete solution for verifying current classical DEP theories. This review reports various imaging, fluidic, optical, and mechanical approaches for measuring the DEP forces at different amplitudes and frequencies. The integration of DEP technology into sensors enables fast response, high sensitivity, precise discrimination, and label-free detection of proteins, bacteria, colloidal particles, and cells. Therefore, this review provides an in-depth overview of DEP-based fabrication and measurements. Depending on the measurement requirements, DEP manipulation can be classified into assistance and integration approaches to improve sensor performance. To this end, an overview is dedicated to developing the concept of trapping-on-sensing, improving its structure and performance, and realizing fully DEP-assisted lab-on-a-chip systems.

15N Hyperpolarization of Metronidazole Antibiotic in Aqueous Media Using Phase-Separated Signal Amplification by Reversible Exchange with Parahydrogen.

Metronidazole is a prospective hyperpolarized MRI contrast agent with potential hypoxia sensing utility for applications in cancer, stroke, neurodegenerative diseases, etc. We demonstrate a pilot procedure for production of ∼30 mM hyperpolarized [15N3]metronidazole in aqueous media by using a phase-separated SABRE-SHEATH hyperpolarization method, with nitrogen-15 polarization exceeding 2.2% on all three 15N sites achieved in less than 2 min. The 15N polarization T1 of ∼12 min is reported for the 15NO2 group at the clinically relevant field of 1.4 T in the aqueous phase, demonstrating a remarkably long lifetime of the hyperpolarized state. The produced aqueous solution of [15N3]metronidazole that contained only ∼100 μM of residual Ir was deemed biocompatible via validation through the MTT colorimetric test for assessing cell metabolic activity using human embryotic kidney HEK293T cells. This low-cost and ultrafast hyperpolarization procedure represents a major advance for the production of a biocompatible HP [15N3]metronidazole (and potentially other hyperpolarized drugs) formulation for MRI sensing applications.

A multifunctional fluorescent Eu‐MOF probe: Its synthesis, structure, and sensing properties

Based on 3‐(2,4‐dicarboxylphenyl)‐6‐carboxylpyridine ligand (H3dpcp), a lanthanide metal–organic framework with the porous three‐dimensional structure was successfully synthesized, namely, [Eu (dpcp)(H2O)]n (1). The experimental results indicated that complex 1 exhibited stable luminescence in the range of pH = 2–11 in aqueous solution. It is noteworthy that complex 1 could recognize tryptophan (Trp) and trans, trans‐muconic acid (tt‐MA) molecules through the fluorescence quenching effect, and showed high sensitivity, selectivity, recoverability, anti‐interference, and low detection limits for the identification of Trp and tt‐MA in aqueous solution. In addition, the fluorescence mechanisms of complex 1 for sensing of tt‐MA and Trp were elucidated in detail.

Computational Spectroscopy of Aqueous Solutions: The Underlying Role of Conformational Sampling.

Fully atomistic multiscale polarizable quantum mechanics (QM)/molecular mechanics (MM) approaches, combined with techniques to sample the solute-solvent phase space, constitute the most accurate method to compute spectral signals in aqueous solution. Conventional sampling strategies, such as classical molecular dynamics (MD), may encounter drawbacks when the conformational space is particularly complex, and transition barriers between conformers are high. This can lead to inaccurate sampling, which can potentially impact the accuracy of spectral calculations. For this reason, in this work, we compare classical MD with enhanced sampling techniques, i.e., replica exchange MD and metadynamics. In particular, we show how the different sampling techniques affect computed UV, electronic circular dichroism, nuclear magnetic resonance shielding, and optical rotatory dispersion of N-acetylproline-amide in aqueous solution. Such a system is a model peptide characterized by complex conformational variability. Calculated values suggest that spectral properties are influenced by solute conformers, relative population, and solvent effects; therefore, particular care needs to be paid for when choosing the sampling technique.

Turn-On Solid-State Fluorescent Determination of Zinc Ion by Quinoline-Based Covalent Organic Framework.

A new quinoline-based COF (covalent organic framework), obtained by Povarov reaction, containing 2,6-diisopropylphenyl moieties as substituents over the heterocyclic ring is described for detecting Zn2+ in aqueous solution. The introduction of the mentioned bulky phenyl rings into the network favors an increase of the distance between the reticular sheets and their arrangement, obtaining a new material with an alternating AB type stacking. The new material exhibits good selectivity to detect Zn2+ by fluorescence emission in aqueous solutions up to a concentration of 1.2 × 10-4m of the metal ion. In order to have a deeper insight into the interaction between the COF and the zinc cation, a thorough spectroscopical, microscopical, and theoretical study is also presented and discussed in this communication.

A novel microporous biomaterial vaccine platform for long-lasting antibody mediated immunity against viral infection

Current antigen delivery platforms, such as alum and nanoparticles, are not readily tunable, thus may not generate optimal adaptive immune responses. We created an antigen delivery platform by loading lyophilized Microporous Annealed Particle (MAP) with aqueous solution containing target antigens. Upon administration of antigen loaded MAP (VaxMAP), the biomaterial reconstitution forms an instant antigen-loaded porous scaffold area with a sustained release profile to maximize humoral immunity. VaxMAP induced CD4+ T follicular helper (Tfh) cells and germinal center (GC) B cell responses in the lymph nodes similar to Alum. VaxMAP loaded with SARS-CoV-2 spike protein improved the magnitude, neutralization, and duration of anti-receptor binding domain antibodies compared to Alum vaccinated mice. A single injection of Influenza specific HA1-loaded-VaxMAP enhanced neutralizing antibodies and elicited greater protection against influenza virus challenge than HA1-loaded-Alum. Thus, VaxMAP is a platform that can be used to promote adaptive immune cell responses to generate more robust neutralizing antibodies, and better protection upon pathogen challenge.

Calcined MgFe layered double hydroxides for magnetic separation and enhanced adsorption performance of methyl orange: Mechanism based on the memory effect

This study successfully synthesized magnetic MgFe-layered double oxides (MgFe-LDO-500 °C) by calcining MgFe-layered double hydroxides (MgFe-LDHs) at 500 °C. Calcination temperature was identified as a critical factor for optimizing adsorption capacity and activating a memory effect, with 500 °C being particularly effective. The adsorption performance of MgFe-LDO-500 °C towards methyl orange (MO) in aqueous solutions was evaluated across varying pH levels (2–12), initial MO concentrations (50–1800 mg/L), contact times (0–1440 min), and temperatures (25–45 °C). The results indicated that MgFe-LDO-500 °C adsorption conforms to the pseudo-second-order kinetic and Langmuir models, achieving a theoretical maximum adsorption capacity of 5087.76 mg/g. Characterization through scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Zeta potential analysis revealed that the outstanding adsorption performance of MgFe-LDO-500 °C towards MO involves a combination of electrostatic attraction, memory effect, and surface complexation. Moreover, after four regeneration cycles, the material maintained a 73 % MO removal efficiency and could be efficiently separated using magnetic separation technology. In conclusion, MgFe-LDO-500 °C represents a promising adsorbent for wastewater treatment.

Development of a FRET aptasensor based on MoS2-doped Zn-MOF as luminophore for selective detection of cadmium in aqueous solutions.

A robust "on-off" fluorescent aptasensor was developed using nanohybrids of molybdenum sulfide (MoS2) quantum dot (QD)-doped zinc metal-organic frameworks (Zn-MOF) for selective and sensitive detection of cadmium ions (Cd2+) in water. This nanohybrid (MoS2@Zn-MOF), synthesized via "bottle around the ship" methodology, exhibited a high-intensity fluorescence emission centered at 430nm (λEm) (blue) on excitation at 320nm (λEx). Further, the conjugation of this fluorophore to phosphate-modified cadmium aptamer (Cd-2-2) was achieved through carbodiimide reaction. The hybridization of prepared sensing probe (MoS2@Zn-MOF/Cd-2-2 aptamer) was done with dabcyl-conjugated complementary DNA (cDNA), acting as energy donor-acceptor pair in the fluorescence resonance energy transfer (FRET) system. This hybridizationcauses the fluorescence quenching of the nanohybrid. In the presence of Cd2+, the aptamer from the fabricated nano-biosensing probe binds to these ions, resulting in release of dabcyl-cDNA oligomer. This release of dabcyl-cDNA oligomer from the sensing probes restores the fluorescence of the nanohybrid. Under optimized conditions (sensing probe/dabcyl-cDNA ratio 1/7, pH 7.4, and temp 28°C), the sensing probe showed a fast response time of 1min. The fluorescence intensity of the nanohybrid can be utilizedto determine the concentration of Cd2+. The proposed aptasensor achieved highly sensitive detection of Cd2+ with a limit of detection (LOD) of 0.24ppb over the range of 1 × 10-9 to 1 × 10-4M along with minimal effects of interferences (e.g., Hg2+, Pb2+, and Zn2+) and good reproducibility. The designed aptasensor based on MoS2@Zn-MOF nanofluorophore offers a highly sensitive and selective approach for rapid screening of metal ions in aqueous environments.

A New Concept for Interpretation of the Viscoelastic Behavior of Aqueous Sodium Carboxymethyl Cellulose Systems.

Viscoelastic behaviors of aqueous systems of commercially available sodium carboxymethyl cellulose (NaCMC) samples with the degrees of substitution (DS) of approximately 0.68 and 1.3, and the weight-average molar masses (Mw) higher than 200 kg mol-1 dissolved in pure water and aqueous sodium chloride solutions were investigated over a wide concentration (c) range of NaCMC samples. The dependencies of the specific viscosity (ηsp), the average relaxation time (τw), and the reciprocal of the steady-state compliance (Je-1) on c were discussed. The relationships ηsp ∝ c3, τw ∝ c2, and Je-1 ∝ c, characteristic of the rod particle suspensions, were clearly observed in a range lower than the c where the critical gel behavior was observed. Thus, a new concept based on the rheology of rod particle suspensions was employed to interpret the viscoelastic behaviors obtained in the c range. In this context, NaCMC polymer molecules are assumed to behave as extended rod particles with length (L) and diameter (d), including effective electrostatic repulsive distances, due to the dissociation of Na+ in aqueous systems. Thus, the number density of polymer molecules is given to be ν = c/Mw, and viscoelastic parameters such as ηsp, τw, and Je-1 are calculated using the theoretical model for rod particle suspensions proposed by Doi and Edwards. This concept reasonably described not only the viscoelastic data obtained in this study but also those from other groups using NaCMC samples with different DS and Mw values.

Metal-Organic Framework for Aluminum based Energy Storage Devices: Utilizing Redox Additives for Significant Performance Enhancement.

There are various methods being tried to address the sluggish kinetics observed in Al-ion batteries (AIBs). They mostly deal with morphology tuning, but have led to limited improvement. A new approach is proposed to overcome this limitation. It focuses on the use of a redox additive modified electrolyte in combination with framework like materials, which have wider channels. The ordered microporous and interconnected framework of ZIF 67, with large surface area, effectively facilitates the diffusion of aluminum ions. Therefore, AIBs are able to exhibit a superior discharge capacity of 288 mAh g-1 at 0.2 A g-1 current density with robust cycling stability. The addition of potassium ferricyanide as a redox-active species in an aqueous solution of aluminum chloride (supporting electrolyte) leads to significant enhancement in the specific capacity with much higher cycling stability. Al-ion based BatCap devices can be assembled by using ZIF 67 as the cathode, ZIF 67 derived porous carbon as the anode, and a redox additive modified electrolyte. The BatCap device exhibits excellent energy density of 86 Wh kg-1 at a power density of 2 KW kg-1, which is higher than reported aqueous AIBs. The ex situ characterization clearly explains the unexplored mechanism of redox additives in AIBs.

A straightforward procedure to build a non-toxic relaxometry phantom with desired T1 and T2 times at 3T.

To prepare and analyze soy-lecithin-agar gels for non-toxic relaxometry phantoms with tissue-like relaxation times at 3T. Phantoms mimicking the relaxation times of various tissues (gray and white matter, kidney cortex and medulla, spleen, muscle, liver) were built and tested with a clinical 3T whole-body MR scanner. Simple equations were derived to calculate the appropriate concentrations of soy lecithin and agar in aqueous solutions to achieve the desired relaxation times. Phantoms were tested for correspondence between measurements and calculated T1 and T2 values, reproducibility, spatial homogeneity, and temporal stability. T1 and T2 mapping techniques and a 3D T1-weighted sequence with high spatial resolution were applied. Except for the liver relaxation phantom, all phantoms were successfully and reproducibly produced. Good agreement was found between the targeted and measured relaxation times. The percentage deviations from the targeted relaxation times were less than 3% for T1 and less than 6.5% for T2. In addition, the phantoms were homogeneous and had little to no air bubbles. However, the phantoms were unstable over time: after a storage period of 4weeks, mold growth and also changes in relaxation times were detected in almost all phantoms. Soy-lecithin-agar gels are a non-toxic material for the construction of relaxometry phantoms with tissue-like relaxation times. They are easy to prepare, inexpensive and allow independent adjustment of T1 and T2. However, there is still work to be done to improve the long-term stability of the phantoms.

Magnetic iron‐oxide coffee husk and khat waste biochar nanocomposites for removal of methylene blue from aqueous solution

AbstractWastewater from the textile and dyeing industries contains hazardous dyes. This study aims to determine the effectiveness of magnetic biochar nanocomposites synthesized from khat leftovers (KLs) and coffee husks (CHs) in removing methylene blue (MB) from wastewater. Magnetic biochar nanocomposites were synthesized by pretreating 25 g of biomass with a 12.5 mmol mixture of FeS and FeCl3 at a 1:1 molar ratio, followed by pyrolyzing at 300°C for 1 h. The resulting products were analyzed using X‐ray diffraction, Fourier transform infrared, scanning electron microscope, and Brunauer‐Emmett‐Teller. The results showed that the adsorbents are amorphous, and the activated biochars, are more porous and contain various functional groups such as C‐O, C = C, O‐H, C‐H, and Fe‐O. When 0.2 g of pristine biochars of CH and KL were applied to 20 mL aqueous solutions containing 20 mg/L of MB at pH 7.5 and 25°C, they removed 44.73% and 75.26% of MB, respectively. However, the resulting nanocomposites exhibited a maximum removal efficiency of 99.10% and 99.23% with magnetic iron oxide‐CH biochar nanocomposite (Fe3O4‐CHBNC) and magnetic iron oxide‐KL biochar nanocomposite (Fe3O4‐KLBNC), respectively, with maximum adsorption capacities of 51.02 and 78.13 mg/g. The reusability study also showed removal efficiencies of 77.57% and 83.49% up to six‐cycle reuse.

Enhanced adsorption and removal of Cd(II) from aqueous solution by amino-functionalized ZIF-8

Zeolite imidazolate framework-8 (ZIF-8), which is a special subgroup of metal–organic frameworks (MOFs), was synthesized and modified by ethylenediamine (ZIF-8-EDA) to prepare an efficient adsorbent for the high sorption of Cd2+ ions from solution. The synthesized and modified ZIF-8 (ZIF-8-EDA) were characterized by X-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, Brunauer–Emmett–Teller (BET), field emission scanning electron microscopy (FE-SEM) with energy dispersive spectroscopy (EDS), and transmission electron microscopy (TEM) analysis. The optimum conditions for dosage of adsorbent, initial ion concentration, pH, and contact time were 0.05 g/l, 50 mg/l, 6, and 60 min, respectively, for cadmium ion sorption from aqueous solutions with a removal efficiency of 89.7% for ZIF-8 and 93.5% for ZIF-8-EDA. Adsorption kinetics and equilibrium data were analyzed using the Langmuir and Freundlich equations. The Langmuir model fitted the equilibrium data better than the Freundlich model. According to the Langmuir equation, the maximum uptake for the cadmium ions was 294.11(mg/g). The calculated thermodynamic parameters (ΔG°, ΔH°, and ΔS°) indicated that the adsorption process was feasible, spontaneous, and endothermic at 20–50 °C. Based on the results, the amino functionalized ZIF-8 had improved adsorption performance due to the replacing of the starting linker with organic ligands that had effective functional groups, leading to chemical coordination due to the interaction of metal ions with the non-bonding pair of electrons on the N atoms of the amino functional group. The selectivity toward metal ion adsorption by ZIF-8-EDA was Cd2+ > Pb2+ > Ni2+‏.

Efficiency of magnetic zeolitic imidazolate framework-8 (ZIF-8) modified graphene oxide for lead adsorption.

Simple and efficient removal of Pb(II) ion from aqueous solution through adsorption has accelerated the development of many new composites to improve this popular method. In this study, the composites of graphene oxide (GO), zeolitic imidazolate framework-8 (ZIF-8), and magnetic materials were synthesized via coprecipitation method utilizing a different molar ratio between FeCl2 and FeCl3 of 1:0.5, 2:1, 3:1.5, and 4:2. The ZIF-8/GO was prepared via room temperature synthesis method prior to its further modification with magnetic materials for ease of separation. It was observed that the MZIF-8/GO2 of molar ratio 2:1 showed the best performance in adsorbing Pb(II) ion. As confirmed by FESEM image, it appeared to be ZIF-8 particles that have grown all over the GO platform and overlayed with Fe3O4 granular-shaped particles. The MZIF-8/GO2 successfully achieved 99% removal of Pb(II) within 10min. The optimum values obtained for the initial concentration of Pb (II) were 100mg/L, pH of 4 to 6, and adsorbent dosage used was 10mg. The Langmuir isotherm and the pseudo-second-order kinetic model were deemed suitable to evaluate the adsorption of Pb(II) using MZIF-8/GO2. Results showed that MZIF-8GO2 achieved a maximum adsorption capacity of 625mg/g of Pb(II) adsorption. All parent materials demonstrated a good synergistic effects, while exhibiting a significant contribution in providing active sites for Pb(II) adsorption. Therefore, this ternary composite of MZIF-8/GO2 is expected to be a promising adsorbent for Pb(II) adsorption from aqueous solution with an added value of ease of post phase separation using external magnetic field.

Removal and detoxification of iprodione in water using didodecyldimethylammonium bromide-montmorillonite organoclay and manganese dioxide.

Combination of organoclay sorption with manganese(IV) oxide (MnO2) catalyzed catechol oxidation was studied for the removal of a dicarboximide fungicide, iprodione, from water. Iprodion in water was sorbed on didodecyldimethylammonium bromide (DDAB)-modified montmorillonite (MT) organoclay and converted into the degraded product, 3,5-dichloroaniline (DCA). The degree of sorption increased by the modification with DDAB, because of the formation of a hydrophobic region for the incorporation of iprodione and negligibly interfered by coexisting MnO2. The half-life for the degradation of irodione in water at 25°C was 7 days, whreas it reduced to 15min in the organoclay. The activation energy, 65.4 ± 4.8kJmol-1, for the first-order reaction in the aqueous solution (pH 7.0) decreased to 43.9 ± 1.8kJmol-1 in the organoclay, indicating the catalytic activity of the organoclay that accelerates the hydrolysis reaction of iprodione. In the coexistence of appropriate amounts of MnO2 and catechol, the degraded product, DCA, reacted with oxidized products of catechol to form a water-insoluble precipitate and was successfully eliminated from water. The results obtained in the present study strongly suggest the applicability of the combined method of organoclay sorption method and MnO2-catalyzed oxidation for the diffusion control of toxic agrochemicals.

Reactive extraction for the separation of glyceric acid from aqueous solutions with 2-naphthaleneboronic acid and tri-octyl methyl ammonium chloride

Reactive extraction for the separation of glyceric acid from aqueous solutions with 2-naphthaleneboronic acid and tri-octyl methyl ammonium chloride

Establishment of chemical fingerprint and determination of main active ingredients in Centellae Herba by HPLC combined with multivariate chemometrics analysis

AbstractIn this paper, a simple and efficient high‐performance liquid chromatography method was established to analyze the chemical composition fingerprint of Centellae Herba (CHA) and determine five triterpenoid active components in CHA, namely, asiaticoside B (AB), madecassoside, asiaticoside, madecasic acid, and asiaticoic acid. The separation of the compounds was carried out on an XD‐C18 column (250 mm × 4.6 mm, 5 µm), the wavelength of the ultraviolet detector was set to 205 nm, and the mobile phase was composed of acetonitrile −0.05% phosphoric acid, 2 mmol/L β‐cyclodextrin aqueous solution, and gradient elution at the flow rate of 1.0 mL/min. A general chromatographic fingerprint consisting of 20 characteristic peaks of 18 batches of CHA samples was established, and the samples were classified and evaluated by similarity analysis, hierarchical cluster analysis, and principal component analysis combined with multivariate econometric analysis. In quantitative analysis, all calibration curves showed good linear regression in the test range (r > 0.999), the average recovery was 96.12%–104.63%, and the relative standard deviations of repeatability and stability were less than 2.00%. The results show that the method is accurate and effective and can be used for the comprehensive quality control of CHA.